Screen printing: a 50% polyester / 50% cotton blend that provides good adhesion for standard plastisol ink. Use an opaque white base under light colors on dark shades, as with any blended fabric.
DTF: suitable for this type of blend; the transfer is not affected by the polyester content.
Embroidery: holds up well; standard stabilizer suitable for fine knit fabric. Be careful with contrasting stripes on the collar and sleeves when placing a design near these areas.
General note: LA Apparel label sewn onto the collar; non-removable, it certifies that the garment was manufactured in Los Angeles and must not be removed. Relaxed mid-length cut—take this into account when placing designs on the lower body. DTG printing is less recommended for this fabric blend, as water-based ink does not penetrate the polyester fiber as well.